Electric furnace installation instructions

The unit is ready to install in the upflow position without modifica- tions. Electric Furnace Installation Instructions. The 1amp breaker is there to protect.

With equipment such as this ground terminals are for ground wires only. Please consult your electric furnace Installation Manual for specific detailed instructions. Save these instructions for future reference.

These instructions are intended to be used by qualified personnel who have been trained in.

Wire: For models E2E(H,B) Series. The Installation instructions are primarily intended to assist qualified individuals experienced in the proper installation of this appliance. Furnace shall be installed so the electrical components are pro-.

AND DOWNFLOW INDUCED DRAFT GAS FURNACES. Correct furnace ground to electrical panel. Before installing this unit please read this manual and the Specification Sheet to. Slide the restrictor plate behind the adapter collar to the full open position (see. Figure 2).

Read these instructions carefully before installing. INSTALLER: Affix these instructions on or adjacent to the furnace.

Detailed instructions for the installation of the venting system design or the venting system. Now it is time to make the electrical connections. The furnace is permanently installed with all electrical wiring . The blower cabinet can also function as an electric fur- nace when used . After installing the furnace, show the user how to turn off gas and electricity to the furnace. Point out control and switch locations for turning off gas and electricity. ELECTRIC FORSAIRE COUNTERFLOW FURNACES.

Units are shipped completely assembled and internally wire requiring only . The precautions listed in this Installation Manual are intended. Special non-WarmFlo, non-heat pump, strip heat . CAUTION: Turn off power source supplying the heater before attempting installation, maintenance . We are assuming he will read the installation instructions that is. This furnace is not watertight and is not designed for outdoor installation.

This EL296UHE furnace must be installed so that its electrical components are protected from water. Learn more by downloading the Sensi Installation Guide which walks. Ensure that the heat output capacity of the installed electrical Add-on Heaters does not exceed the rated output capacity of the furnace burner.

G2V Gas Furnace Downflow Installation Manual.