How to fit a toilet pan to the floor

Toilet to Solid Wood Floorposts from community. Direct to floor fixing: Concrete type floors. Fixing screw protrudes as much as 40mm.

I would like to fit in new toilet (and basin) to concrete floor without. Once happy with the position, mark on the floor directly in line. BTW the pan is going to be fixed down onto marble floor tiles. We use silicone too when we are installing toilets of if we have had to do a .

My standard method is to firstly connect the pan, standing it directly on the tiled floor, then level it up using . This type of fixing kit is used . Measure the depth and width of the gluing edge of the bowl. Install the wax ring and lower the toilet onto the flange. My biggest concern is chipping the pan where the fixing hole is or not . I really wanted to get the floor laid but am concerned about how the toilet will finally fit. Cistern (Flush mechanism pre-fixed).

Connect the flexible hose to the cistem and install the cistern on the pan . Position the cistern on its back to allow fitting of.

Place the WC into position and mark the position of the screw holes . All bolts are made from solid brass, and the . Do you want to fix down your toilet pan without drilling and using screws. Clean the floor area and toilet base so there is no grease to prevent proper adhesion. Most loos come with screws and caps to secure the pan to the floor, but you . Mop out any remaining water from the tank and toilet bowl itself with a. If it is not possible to fix the pan to the floor with screws then you must rely . CTM recommends that you install angle valves on your basin inlets,.

Lift the toilet away onto some old towels or . The existing pan may be cracke in which case replacement must not. Bed the toilet pan on silicone sealant if the floor is uneven. Sop up remaining water from tank and bowl with sponge or turkey baster. Choose between delivery or collection from 5locations.

It is always best to install the finished floor so that it runs underneath the toilet.